Join our mailing list!










  Home >

Profi+GPS
Profi+GPS


 
List Price: $5,000.00
Our Price: $5,000.00

Product Code: HC-PROFI-GPS
Qty:

Description
 
Special order only

The HeliCommand GPS module offers the possibility to hold the helicopter in position, no matter in which altitude above ground. The system works independent of the HeliCommand Profi's optical system.
On top, the optic will support the GPS-based position functionality near ground level for a much more precise positioning than with GPS only (when option is activated).
In case of a GPS signal loss, the system will switch not only to Horizontal-mode but Position-mode. The already integrated (redundant) optical system allows this additional safety plus.
The entire system HeliCommand Profi with GPS is an optimised assistance for aerial photography or surveillance.


Technical data:

- Operating voltage: 4,7...7V (4 - 5 NC/NiMH)
- Current drain: 80-90mA
- Dimensions [mm]: 48x97x20
- Weight (excl. cable): 48g
- Weight cable: 74g
- Temperature range: -15°...+50°C, +5°...+122°F
- Satellites: 16 channels
- SBAS-compatible: yes (differential systems EGNOS, WAAS)
- Accuracy of position: 2,5m (without DGPS, relative drifts are usually less)
- Max. resolution: 0,02m
- Update rate: 4Hz
- Boot-up time Hot-Start: <10s (in blue sky, known almanac data)
- Boot-up time Cold-Start: < 1 min (typically in blue sky)
- Data-retention-buffer for saving almanac data
- Compass magnetometer with 3-dimensional correction algorithm and automated calibration process (once to be carried out via PC at installation, against magnetic influences from electrical engines and irradiating parts)


Includes:

- GPS- and compass module "HCP-GPS"
- Screened connection cable to HeliCommand Profi and PC/Notebook
- CD with PC software incl. setup guide and user manual
- double sided foam tape
- incl. firmware upgrade for HC Profi sensor unit

Share your knowledge of this product with other customers... Be the first to write a review

Built with Volusion